The house on one screen
Devices are grouped by room, with their state and a direct switch. The counters at the top — total, online, offline, rooms in use — sum up the estate, and those covering devices open the full list.
Proof of concept
A home automation hub that brings Zigbee, Z-Wave, Matter, WiFi, BLE, infrared and solar inverters behind a single interface: devices, rooms, scenes, automations, alarm and energy in one place. A test bench too — an opportunity to put the koraiCore platform to the test where it was not expected: real time, hardware, the edge.
A well-equipped home ends up with as many apps as it has brands. Each one controls its own bulbs and knows nothing about the rest.
Everything below works today. The demonstration screens rely on a fully virtual home — one site, two floors, six rooms, twenty-four devices — an inverter and a car among them — and a camera, all simulated — and koraiAssist is also tested on real installations, with real sensors and devices: Zigbee bulbs and motion sensors, connected speakers, badge readers.
Devices are grouped by room, with their state and a direct switch. The counters at the top — total, online, offline, rooms in use — sum up the estate, and those covering devices open the full list.
Zigbee, Z-Wave, Matter/Thread, WiFi, BLE, Broadlink infrared, Govee, WiiM, Chromecast, Gree air conditioners, Reolink cameras and connected vehicles all feed into the same registry, with the same normalised capabilities — switch, dim, open, measure. That is what lets a scene mix a Zigbee bulb and a Z-Wave blind seamlessly. A data source becomes a device too — local weather, public holidays, air quality, sunshine — and reads like a sensor in the rules. The inventory can be grouped by family, room or protocol.
Site, zone, room: the hierarchy organises devices and scopes the rules. The floor plan places each device by drag and drop and makes its state readable at a glance.
A scene chains commands — dim the lamp, close the blind, cut the socket — with delays in between. An automation is built as WHEN / IF / THEN: a sensor, a time, sunrise or sunset, the weather or an external call fires it, a condition filters, an action runs — with if / else branches, named states that other rules read, occupancy zones that group several sensors and values that change with the season. A wizard generates a light path — lamps that come on ahead of you from room to room. Each room can also keep its own lighting ambiance, by time of day, which lamps pick up when switched on. Execution is delegated to koraiCore’s rule engine rather than rewritten.
The modes — disarmed, home, away, night, panic — rely on the contact and motion sensors already in the house, grouped into zones, with entry and exit delays, a PIN and an event log. A camera in the room concerned can attach its snapshot to the alert.
The mode of the house — home, away, night — is set from the screen or left to the phone: a geolocation application calls a dedicated webhook on every entry into and exit from a zone, and the token can be regenerated on demand. Comings and goings are logged by zone and by user, and a holiday simulation drives devices at random for as long as the house stays empty.
NFC badge readers record every pass. A badge carries its card number, type, holder and status — active, pending, lost — and a pass can fire an automation: light the hallway, notify the household, say welcome.
Alarm triggered, low battery, device offline, abnormal consumption, electricity contract expiring: every alert lands in koraiAssist, and the most serious ones also go out by email and as a push notification on the phone, in each person’s language. Quiet hours hold back the rest and sum it up when they end, never holding back the alarm; reminders about an offline device grow further apart instead of repeating.
Sockets and devices able to measure report their power, and the Linky meter readings tell what the whole house uses — including what no socket sees. The cost follows the real tariff: peak / off-peak periods, Tempo, surplus resale, or the supplier account with its bills, instalments and upcoming adjustment; gas is tracked alongside. The carbon footprint counts each kilowatt-hour at the grid’s CO₂ intensity for its hour. The breakdown is shown by room and by device, and each monitored socket learns its usual consumption to flag the one that drifts away from it.
The Optimisation page puts a yearly figure in euros on what can be saved: the night-time baseload and its drift, appliances that could move to off-peak hours, anomalies, and the best-suited electricity offer. It spots the water heater in the meter curve and checks it heats at the right hours, measures what each circuit draws when its breaker is switched off for an hour, and judges each socket against the profile of the appliance plugged into it.
Huawei, Fronius, SMA, GoodWe and Enphase inverters are polled continuously: production, consumption, battery, import and export, with self-consumption, autonomy and euros saved, and a production forecast for today and tomorrow. The inverter is a device like any other: an automation can fire on the surplus, and a regulator sends it to a load — water heater, battery, car charger — instead of selling it back. Hyundai, Kia and Genesis connected vehicles report their charge, and each charging session is costed at the house tariff.
koraiAssist never connects to a broker directly: a koraiCore agent sitting on the local network carries the collectors — mqtt, matter, ble, wiim, cast, broadlink, govee, solar, vehicle, nfc, among others — and forwards device states. The hub can therefore run elsewhere, remotely included, without the devices leaving the house.
The screens adapt to narrow displays, and the app installs from the browser. Offline it still opens, but without data: the local cache keeps the interface, never the readings.
koraiAssist was first built to test the koraiCore platform outside its usual ground — management, forms, reference data. Home automation means real time, hardware that fails and unreliable networks.
Users, roles and fine-grained permissions, isolation between households, translations, a single GraphQL API, logging: koraiAssist inherits all of it instead of rewriting it. koraiCore’s rule engine runs the automations, and its agents carry the collectors.
See the koraiCore platformkoraiAssist’s Bluetooth collector is exposed as a service in its own right; koraiClub uses it to pair the sensors of a training session. That an exploration feeds a commercial product is its most concrete result.
See koraiClubThe hub is hosted wherever you choose, broker credentials stay on the local agent, and readings are stored in a database you own. What does leave is optional: Spotify goes through Spotify’s cloud, and the Alexa and Google Home entry points through Amazon’s and Google’s.
koraiAssist is a home automation hub built by Koraisoft on its koraiCore platform. It brings devices from different protocols into one inventory, sorts them by room, drives them through scenes and automations, arms an alarm on their sensors, and follows the home’s consumption all the way to the meter, the supplier and the solar surplus. It is a proof of concept explored internally, tested on a virtual demonstration home and on real installations.
No. koraiAssist is a proof of concept that Koraisoft explores internally: it is not distributed, not supported, and no roadmap commits to it. There is no version to download and no commercial offering. If the subject interests you, writing to Koraisoft is the only way in today.
koraiAssist handles Zigbee and Z-Wave (through an MQTT broker), Matter/Thread (through a Matter server), WiFi, Bluetooth Low Energy, Broadlink infrared, Govee, WiiM speakers, Chromecast, Gree-protocol air conditioners and PC/SC NFC badge readers. Reolink cameras and Hyundai, Kia and Genesis connected vehicles join the inventory too, and Huawei, Fronius, SMA, GoodWe and Enphase solar inverters are polled separately. All of this was tried as part of an exploration, not certified.
Not necessarily. The koraiAssist hub is hosted wherever you choose, a koraiCore agent on the local network talks to the devices and keeps the broker credentials, and readings stay in a database you own. Some integrations rely on external services by nature: Spotify goes through Spotify’s cloud, and the Alexa and Google Home entry points through Amazon’s and Google’s services. None of them is needed for the hub to work.
koraiAssist explores what the koraiCore platform brings to home automation: roles and permissions, isolation between households, a rule engine, agents and an audit trail — building blocks a consumer hub has no reason to carry. It is an internal Koraisoft exploration, not a product to install at home.
Multi-protocol home automation, solar self-consumption, or more generally what can be built on the koraiCore platform: if any of these topics interests you, we would be glad to discuss it.
Get in touchThe screenshots on this page and the online demo run on fictional, deliberately small datasets: they illustrate only part of what the product does, and some features are limited or switched off in the demo environment.